How to maintain waterproof luminaires How to install waterproof luminaires

Waterproof lamps are later developed to prevent immersions in the structure of the lamps, with a good material of the rubber ring with a reasonable design and sophisticated technology to produce waterproof lamps , then waterproof lamps how to maintain it? The following Xiao Bian will introduce you to the relevant knowledge of waterproof lamps . Let's take a look!


Waterproof lamp maintenance

1. Before the waterproof lamp is cleaned, the lamp needs to be turned off first, and the lamp cover is wiped cleanly with a clean cotton cloth. When cleaning the bulb, it should be removed and wiped. When cleaning, do not use too much force.

2, in the daily use of waterproof lamps, do not put things on the top of the lamp or used to dry clothes, etc., can not be frequent fidgeting and switching, or lamp life will be affected.

3, if the waterproof lamp used for a long time, we need to pay attention to look at the lamp has not occurred in the case of aging, light bulb color changes, etc., so that there is a timely replacement of new light bulbs.



Waterproof lamp models and grades

IP0: No protection.

IP1: Prevents intrusion of drip water. Drops of water (such as condensate) that are dropped vertically will not have a detrimental effect on the luminaire.

IP2: Dripping at 15°C can still prevent drip intrusion. When the lamp is tilted from vertical to 15°, it will not cause harmful effects on the lamp.

IP3: Prevent spray water from intruding, protect against rain, or prevent water sprayed into the fixture with a vertical angle less than 60 degrees to cause damage.

IP4: Prevents the intrusion of splashing water and prevents water splashed from all directions from entering the fixture and causing damage.

IP5: Prevents the intrusion of jetted water, preventing water from the nozzles from all directions from entering the fixture and causing damage.


Waterproof lamp installation method

When the LED light strip is installed, if it is normally placed in the lamp slot, it can be installed as straight and it can be fixed with a string or a thin wire. However, if it is to be installed on the outside or installed vertically, then you need another wind purchase clips and tail plugs. The original clip is fully transparent, and it is best to put waterproof glass glue on the plug and plug after the device is installed, so that the waterproof function is better.


These are small to give us a waterproof lamps to how maintenance, waterproof lighting installation method. After reading the above introduction, did you have more understanding of the waterproof luminaire knowledge? I hope the introduction of Xiaobian can help everyone. If you want to know other related information, please continue to pay attention to this website. More exciting please. look forward to!

Light fixture

Dichlorophenylphosphine Basic Information
Product Name: Dichlorophenylphosphine
CAS: 644-97-3
MF: C6H5Cl2P
MW: 178.98
EINECS: 211-425-8
Mol File: 644-97-3.mol
Dichlorophenylphosphine
Dichlorophenylphosphine Chemical Properties
Melting point:  −51 °C(lit.)
Boiling point:  222 °C759 mm Hg(lit.)
Density:  1.319 g/mL at 25 °C(lit.)
Fp: >230 °F
Storage temp. :Store below +30°C.
Form:  Liquid
Specific Gravity: 1.319 (20℃)
Color:  Clear colorless to slightly yellow
Sensitive:  Moisture Sensitive

Flame Retardant Series

Phenylphosphonium dichloride,Diphenylphosphine chloride,Phenylphosphinic acid,2-hydroxyethylphenylphosphinic acid,Phenylphosphonic dichloride,Phenylthiophosphonochloride

ShanDong YingLang Chemical Co.,LTD , https://www.sdylhgtrade.com