How Cabinet Companies Deal with Market Transformation

How Cabinet Companies Deal with Market Transformation

As the overall environment for the development of the home industry faces adjustments, transformation and upgrading have also become an inevitable trend for cabinet companies to avoid. Although the transformation will bring “grief”, but cabinet companies also need to recognize that all issues can not be attributed to the transformation, must start from within the company itself, to find problems to solve the problem.

Problems caused by market transition Cabinet companies need to do internal supervision

Cabinet Market Transformation Causes Bad Phenomenon

The current market for cabinets is “the sky is flying all over the sky and the problems are still frequent”. Especially after environmental protection has become a new standard for consumers to purchase, the certificates of various testing organizations fill the market. However, the information about the quality of the cabinet brands being exposed is still inexhaustible, and the installed certificates have become a trend to counterbalance.

"The transformation of a market will inevitably set off an industry storm." This is the current understanding of the transformation of most people. It is precisely for this reason that many people attribute the various bad phenomena in the cabinet industry to the "complications" of the transition period. Any industry transformation will face a variety of problems, this is true, but if all the problems that appear in the cabinet industry are attributed to the transformation, it is a partial overview.

The root of the quality problem is still in the company itself.

According to the rules of commercial operation, it is normal for an industry to appear in the transition period when the company does not adapt to the market. However, in the transition period, the cabinet industry was frequently exposed to quality problems, and the quality of products was a basis for a company to settle down. However, the frequent occurrence of problems indicated that the company itself had problems in its operation.

The low entry threshold for cabinet companies has caused a large number of unqualified companies to enter the industry. There are bound to be too many companies, and the cabinet industry has not standardized the industry from the very beginning. The number of unqualified companies More can be imagined.

Increase supervision to purify the market environment

On the other hand, the business climate of eagerness for quick success is flooded with the cabinet industry. Many cabinet companies only seek profits. However, due to the large number of companies in the market, the market space is not easy to expand, and the supply of raw materials is tight. To obtain more benefits, only the cost can be reduced, so cabinet products produced by cutting corners are put into the market.

"Later unclear specifications and late-warming trends" have prevented the cabinet industry from developing steadily. The original cabinet industry was in a period of development, and the production capacity could be quickly consumed by the market. The problem was not obvious. As the speed of development slowed down, the original problems erupted. Therefore, the supervision of the cabinet industry cannot be based on hope. Based on the success of the market transformation, enterprises themselves should also increase their supervision, and also a clean operating environment before the formation of new markets.

A Geogrid is Geosynthetic Material used to reinforce soils and similar materials. Commonly used for soil reinforcement applications such as retaining walls, steepened slopes, bridge abutments, embankments, embankments over soft soils and waste containment, as well as subbases or subsoils below roads or structures. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case. Lianyi geogrid offers a number of geogrids to meet any specific requirements.

Application:

1,It can widely apply in the water conservation, the municipal administration,
2, The building,the transportation, the subway,the tunnel,
3, The environmental protection and so on.

geogrid application
Funcations:
1, Improving bearing capacity of road foundation and prolong its service life.
2, Preventing road surface from subsiding and cracking.
3, Be convenient for construction, reducing cost and maintaining expense for the project.
4, Providing stability for slopes and avoid the losing of the water and soil.

Packing & Delivery

geocell packed.quantity in containerjpg

geogrid packed


Geogrid Specifics:

Property
Test Method
TGSG

15-15
TGSG

20-20
TGSG

30-30
TGSG

40-40
TGSG

50-50
Ultimate tensile strength
MD





ASTM D 6637
15
20
30
40
50
CD
15
20
30
40
50
Elongation at maximum load (%)
MD
13
13
13
13
13
CD
13
13
13
13
13
Tensile strength at 2 % elongation (kN/m)
MD
5
7.5
10.5
14
18
CD
5
7.5
10.5
14
18
Tensile strength at 5 % elongation (kN/m)
MD
7
14
21
28
35
CD
7
14
21
28
35
Minimum Carbon Black
%
ASTM D 4218
2


Geogrid

Uniaxial Geogrid,Plastic Bidirectional Tension Geogrid,Pe Biaxial Geogrid,Fiberglass Geogrid

Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com